Specifications


SANYO Sterisonic Gxp Series
Single Chamber Model Number MCO-19AIC-UVH MCO-19AIC-UV MCO-19AIC
Dual Chamber Model Number MCO-38AIC-UVH MCO-38AIC-UV MCO-38AIC
Major Operating Systems
H2O2 Sterilization System Standard Optional Optional
SafeCell™ UV System Standard Standard Optional
Single Beam, Dual Detector IR CO2 Sensor Standard Standard Standard
InCuSaFe™ Copper Enriched Stainless Steel Interior Standard Standard Standard
LCD Graphical Controller/Display, Door Mounted Standard Standard Standard
Direct Heat, Air™ (DHA) Air Jacket Standard Standard Standard
Sterilization and Decontamination
H2O2 Sterilization System Vaporization in situ Optional Optional
Interior UV Lamp, Programmable, Ozone Free Standard Standard Optional
Copper Enriched Stainless Steel Interior with Germicidal Protection Standard Standard Standard
Environmental Performance
Temperature Control Range +5°C above ambient to 50°C (in a 5°C to 35°C ambient).
Temperature Control Uniformity and Deviation ±0.25°C in 25°C ambient, setting 37°C, 5% CO2, no load
CO2 Control Range and Deviation 0% to 20%, ±0.15% in 25°C ambient, setting 37°C, 5% CO2, no load
CO2 Sensor Platform Ceramic based, single beam, dual wavelength measurement of actual vs. contrast, with continuous auto-zero calibration.
CO2 Sampling Patent Pending No moving parts; airflow passes over in/out ports to sustain Venturi effect, continuous sampling
CO2 Calibration Single point zero automatic; semi-automatic one point span @ reference optional.
Airfl ow Gentle vertical airfl ow, continuous with inner door closed.
Interior Humidity 95%RH @ 37°C through evaporation via DHA™ heating system; reflective optical low water sensor.
Control, Monitoring, Alarm
Temperature and CO2 Control P.I.D, setpoint resolution 0.1°, 0.1%
Display Alphanumeric LCD digital display messaging.
Data Acquisition Automatic log function of temperature and CO2.
Communications Remote alarm contacts standard. Optional 4-20mA connection.
Optional PC interface, Catalog No. MTR-480 with RS232/RS485 data ports available.
Cabinet Design and Construction
Superstructure, Exterior Cabinet and Door Galvanized steel exterior, baked-on enamel finish
Interior and Shelves Copper-enriched stainless steel
Inner Door Tempered glass
Insulation Rigid foam polyurethane
Outer Door Reversible, heated.
Access Port Single opening with interior and exterior 30mm non-VOC silicone stoppers.
Leveling Feet 4, Adjustable.
Energy, Electrical, Utilities
Maximum Power Consumption 310W 310W 310W
Maximum Heat Discharge 1062 BTU 1062 BTU 1062 BTU
Electrical 115V,60Hz with NEMA 5-15 plug provided; requires NEMA 5-15R grounded receptacle.
CO2 Gas Connection 4 to 6mm inner diameter tubing
CO2 Gas Pressure Nominal 4.3 PSI from two-stage CO2 regulator
CO2 Gas Cylinder Switchover System Optional Optional Optional
Dimensions, Weights, Capacities
Interior 19.3" W x 20.6" F-B x 26.2" H (490 x 523 x 665 mm)
Exterior 24.4" W x 27.9" F-B x 35.4" H (620 x 710 x 900 mm)
Volume 6.0 cu.ft. (170 liters)
Shelves Maximum 15/chamber, 4 supplied standard; 17" x 17" (450mm), 15.4 lbs/7kg capacity
Net Weight 205 lbs (93kg) nominal
Specifications